Curing Large Parts by Changing Device Geometry | 您所在的位置:网站首页 › dlp 065 › Curing Large Parts by Changing Device Geometry |
Over the weekend, I was thinking that larger parts could be cured by changing to larger petrie dishes, substrate location (bed), and projection dimensions. It's my guess that higher resolution (1080i/p) projectors would have to be used - which then led me to trying to figure out the differences in DLP chipsets. TI and Mitsubishi make some of the chips. Looking at IT, there's a 055 DLP, 065 DLP and something called a 1080p DLP DarkChip technology - supporting home theatre.
On a separate note, I found this little jewel that very nicely explains DLP and printing. The interesting thing that I saw was the "inkjet" parts. Hmmm...so if Z went in reverse and there was a curing vat that supported that...next model John? http://www.ti.com/solution/dlp_3d_printer#Tools" onclick="window.open(this.href);return false; and Software And a decent high level on DMD for projectors. http://www.globalprojectors.com/The-imp ... _58-1.html" onclick="window.open(this.href);return false; |
今日新闻 |
推荐新闻 |
专题文章 |
CopyRight 2018-2019 实验室设备网 版权所有 |